How to maintain plastic granulator

It should be noted that maintenance and repair are equally critical tasks. Maintenance is a protective measure against the wear and damage of machine equipment parts. Repair and replacement of parts are a necessary means to ensure that all production and manufacturing are properly done, so that machine equipment can exert its original performance. These two tasks should be well combined to prevent dominance and prevent it from happening. Before the parts of the machinery and equipment are damaged and cannot be operated, they should be repaired and replaced in time to ensure that the machinery and equipment have a long-term good operating state.

Preparations before starting the plastic granulator Clean the sanitary environment around the extruder, clean the extruder, and the attached machinery and equipment. Carefully study the safe operation rules of the extruder, understand and understand the function and function of each part and component in the structural characteristics of the machine equipment, and memorize the function and usage of each switch and button. Check whether the nuts on the device are loose. Check that the safety guards are strong. Check that the installation of the V-belt is tight and properly adjusted. Move the V-belt, the rotation should be relatively easy, and the screw of the extruder rotates without clamping. Check the rotation direction of the extruder screw. Check towards the barrel mouth. If the screw thread of the extruder is right-handed, the rotation direction of the extruder screw should be clockwise. Check whether the protective grounding of the equipment and control cabinet is tightened.

Appropriate and effective application of plastic granulators can increase the length of service life, the level of productivity, and the quality of product quality. They are all related to the manufacturing quality of machinery and equipment and the selection of machinery equipment model specifications. However, how to allow the operator to use the equipment reasonably and how to pay attention to the maintenance of the equipment and equipment also has an immediate relationship with increasing the service life of the plastic pellet machine and all the normal productivity of the extruder.

For the plastic granulator to be properly applied, it is necessary to pay attention to the following content. The relative facilities and equipment of the production line should be matched, and the production capacity of each machine should be matched. Each machine can make full use of the efficiency so that the machines of the production line can work in coordination. The oversupply or insufficient supply between the left and right process flow, termination, etc., are all attributed to the selection of unsupported facilities of machinery and equipment, and the unscientific selection of specifications and models. The model specifications of the extruder should be selected according to the product specifications and model requirements.

⒈Plastic granulators are forbidden to talk with irrelevant personnel and machine equipment operators, and only one person is allowed to actually operate the button commands on the electric control panel;

⒉Regularly check the insulation effect of wires and circuits, and pay attention to the warning content on the warning signs of machinery and equipment;

⒊Non-professionals are not allowed to open the cabinet door before the power distribution cabinet of the plastic pellet machine is powered off, and it is forbidden to adjust the CNC blade before the plastic pelletizer is completely stationary;

⒋When the active parts and the hopper are clogged, do not use hands or iron rods, but only use plastic rods to handle them carefully;

⒌Be careful of burns when the plastic pellet machine touches the high-temperature parts. When the kneader is working, it is forbidden to reach the upper body of the worker to visit or pluck the material;

⒍If the power is cut off during the work, the motor circuits should be cut off and the materials in the machine should be cleaned up in time. After the material is carbonized, it will affect the next production;

⒎When there is a system failure in the machine of the plastic pellet machine, the operation of the machine shall be terminated within the first time, and it shall not be claimed on its own. And notify and wait for the mechanic to check the repair or telephone to guide the repair;

⒏Prevent all factors from causing damage to machinery and equipment and the occurrence of safety accidents; strictly follow the standardized operation procedures to do the actual operation, reduce the occurrence of system failures or safety accidents.