Shuliy copper wire recycling machine safe and reliable waste wire processing equipment

Shuliy copper wire recycling machine is a safe and reliable waste wire processing equipment. Copper wire recycling machine refers to the dry crushing of various waste wires and cables, automobile wires and telephone lines, household wires, etc. Combined metal separation and sorting equipment for metal and plastic separation. Shuliy copper wire recycling machine is a safe and reliable waste wire processing equipment. Models include 600, 800, 1000 and so on. The name of the copper wire recycling machine model is mainly based on the width of the inlet of the crusher in the copper wire recycling machine. The distinction of models actually represents the output of the equipment to some extent.

Equipment structure / composition:

1. The dry copper wire recycling machine is a combined machine, which is integrated on a platform by a machine such as a crusher, a feeding conveyor, a specific gravity air sorter, and a dust collector.

2Shuliy electrostatic separator

3.Dust removal system

4. Other equipment: conveyor, iron remover, knife sharpener.

Working principle: After the raw material is crushed by the crusher, the size of the crusher screen is used to control the size. The crushed material is dropped on the feeding conveyor and sent to the specific gravity air sorter through the feeding conveyor. Machine parameters to adjust the sorting effect.

Method / step:

1. After the waste wires are sorted, the iron impurities inside are separated, and then the waste wires are sent to the crusher and processed to the specified size. If the output is relatively large, sometimes it will have multiple crushing processes, and after crushing and crushing, it will become a non-metal mixture such as metal and plastic.

2. After the waste wire is broken, it enters the airflow sorting machine to separate the copper rice and the plastic particles. Copper rice and plastic particles are re-sorted in a vibration sorter. Pure copper rice is separated in the front and plastic particles are in the back.

3. As the copper wire is cut, a certain amount of copper powder will be produced. When the output is relatively large, the amount of this copper powder is also considerable. Generally, we would recommend adding an electrostatic separator after the airflow separator. The copper powder and very fine copper particles contained in the sieved plastic particles are further sorted out.

4. Set the specifications and quantity of the conveyor according to the actual situation of the user. Iron removing machine: Generally installed above the conveyor to remove iron impurities that may be contained in the material. The sharpener is larger than the production line, and the maintenance time has a greater impact on production efficiency. Adding a sharpener to the knife in the crusher can reduce the downtime and increase the profit.

Shuliy environmental protection production copper wire recycling machine manufacturer, providing dry copper wire recycling machine, small copper wire recycling machine, large copper wire recycling machine and other waste wire processing equipment, its dry copper wire recycling machine equipment is exported to all parts of the world, specific equipment For details, please consult Shuliy Environmental Protection.

Waste car line treatment

Every year, a large number of scrapped automobile waste wire harnesses are wasted, mainly because the wire harnesses are mainly composed of non-metallic materials such as rubber plastics and copper, aluminum, and metal materials. Traditional recycling methods include manual stripping and water separation. The efficiency is very low. Economic benefits Not obvious, low recycling efficiency, waste of resources, and high costs!

Waste car line recycling selection Shuliy copper wire recycling machine has high efficiency and obvious economic benefits. The dry copper wire recycling machine is composed of a shredder, a belt conveyor, a dust removal device, a wind separation device and the circuit control design of the device. The waste wire harness is crushed, and the metal and non-metallic materials of the wire harness are separated by air selection, which has the advantages of high recycling efficiency, environmental protection, and labor-saving.

  Shuliy environmental protection dry copper wire recycling machine not only overcomes the waste of resources and secondary pollution in traditional mechanical wire recycling but also effectively improves the metal recycling rate in waste wires and cables. Through the process of mechanical crushing, belt conveying, magnetic iron removal, gravity separation, and electrostatic separation, the production line recovery process is realized, and the fibers in the waste wire and cable and the dust generated in the production process are effectively concentrated by the dust removal system. Effectively eliminates environmental pollution.

The processing capacity is 3-5 tons per day, which can be suitable for processing all kinds of household electrical wires, wires and cables, communication cables, and communication optical cables ≤20mm, etc., can be formulated according to customer requirements, stable operation, convenient operation, high degree of automation; achieve low energy consumption Efficient production meets energy-saving and environmental protection requirements.

  Shuliy's environmentally friendly dry copper wire recycling machine is safe and efficient in the process of treating waste wires. The quality of the recovered copper rice is good and the economic benefits are obvious. device. If you have the intention to purchase copper wire recycling machine equipment, we sincerely invite you to visit our factory for a site inspection and visit. We can arrange on-site test machines for you, so that you can truly see the sorting effect of dry copper wire recycling machine.

Impact of Plastic Granulator Industry on Society

From the rise of the past few decades to the present scale, it is the general trend of the plastic granulator industry development. After a huge development and change from scratch, the plastic granulator industry has ushered in the impact of the global economic crisis. New challenges and development opportunities, industrial structure upgrades and economic structural adjustments are imperative. The following are the general trends predicted by experts in the future development of the plastics industry. The sustainable development of the industry is the key to the sustainable development of the whole society, and energy-saving and emission reduction is the key measure of sustainable industrial development.

In China, the utilization rate of plastic resources is very low. Not only energy consumption is serious, but the products produced are not directly proportional to consumption. It is almost impossible to make ends meet. In the long run, resources and the environment are difficult to support. Development is unsustainable. At present, the use of waste plastics to make them recyclable is more reasonable and more in line with the sustainable development strategy of plastics. The rapid development of the plastics industry is obvious to all, and people's clothing, food, housing, and transportation are inseparable from the contribution of plastic materials.

Actively develop industrial plastic waste recycling technology. In the present age, it is beneficial. Recycled plastic is the recycling of used materials or waste plastic produced by a stick machine and then cut into pellets by a pelletizer. Kind of plastic particles. Waste plastic resources are known by modern economists as human's second mineral, a treasure in the city. Recycling and granulating waste plastics can alleviate the contradiction between supply and demand of plastic raw materials and save a lot of foreign exchange for crude oil imported by the country. In addition, since most plastics are non-degradable, they accumulate over time, causing severe white pollution and destroying the earth's ecological environment. The disposal of waste materials is not only tricky but also has a huge impact on the environment. Therefore, as a developing country, China's active development of the waste plastic recycling industry is indeed a major event that benefits the country and the people, contributes to modernity, and benefits.

Seeing how waste plastics become a darling of the market and the advent of plastics is a great convenience for people's lives. It is the welfare brought by scientific progress. These recycled plastic particles still have good comprehensive material properties, which can meet the technical requirements of film blowing, wire drawing, tube drawing, casting, and extruded shapes, and are widely used in the production of plastic products. After further processing by plastic products enterprises, they have become our common plastic basins, folders, plastic films, industrial and agricultural machine parts, etc. These products are widely used and have become the darlings of the market.

Waste plastic machinery and manual cleaning methods

There are two methods for cleaning and drying waste plastics: mechanical cleaning and manual cleaning. Some plastic products can only be cleaned manually after recycling, and some plastic products can be mechanically cleaned and dried.

The following are the specific operations of mechanical cleaning and drying. Toyota Machinery reminds you that mechanical cleaning and drying are divided into intermittent and continuous.

Intermittent cleaning

First, wash waste plastic into a water tank, and use a plastic mixing machine to remove loose dirt, such as sand and dirt, adhering to the surface of the plastic, and sink it to the bottom of the tank. A special pump is used to further purify the sedimentation tank; for dirt that is firmly attached, such as printing inks and adhesive-coated paper labels, you can manually pick out the larger piece and put it in hot alkali after crushing by a plastic pulverizer Soak in the aqueous solution tank for a period of time, and then rub and rub each other with mechanical stirring to remove dirt. Finally, the washed and crushed waste plastic is sent to a centrifuge to be dried, and dried in two steps of hot air to a residual moisture of ≤0.5%.

2. Continuous cleaning

The waste plastic is sent to a plastic crusher by a conveyor belt for coarse crushing, and then sent to a large separation section, where sand and gravel are sunk into the water bottom and sent away regularly. The floating material enters the wet mill through the conveying roller, and then enters the sedimentation tank. Everything heavier than water is separated, even the smallest particles are no exception, achieving the best cleaning effect.

Metal packing machine operation skills

1, the metal baler is equipped with a buffer silo and feed conversion device. Since the multi-cylinder hydraulic cone crusher crushing principle is the use of a laminate, which requires feeding filled evenly, and to a large quantity, and so the equipment used in the installation must pay attention to the front of the device with a buffer silo, to ensure that the cone crusher for continuous material. Equipment to the feeding amount to be adjusted accurately controllable, install the inverter feeding equipment, ensure the stability of the device filled with feed.

2, the mounting means center feed. Break out of the multi-cylinder hydraulic cone material is an important factor in its effectiveness and the service life of the crushing impact. Metal baler equipment to be installed central feed device to ensure that the center feed. Discharge equipment must be kept smooth and prevent the material from too wet, too much or too material powder caused by the accumulation in the bottom of the device, and damage to equipment.

3, for the metal baler belt installation device and the check equipment in addition to iron. It is a multi-cylinder hydraulic belt cone crusher feed conveyor means, arranged so the correct belt is also related to the good functioning of the device. Feed belt plus confidential cone crusher and damage to the equipment in addition to iron, to prevent excessive iron. And checking means can be prevented from falling too heavy material, thereby reducing the belt strip to produce the trouble to stop the feed belt conveyor is stopped.

Scrap steel pipe processing equipment

Scrap crusher is a kind of crushing machine used to produce scrap steel crushing materials, mainly used for scrapping cars, scrapping household appliances and light and thin scrap steel. The main body casing is made of extra-thick steel plate, and the inner lining is made of high-manganese cast steel, which can be replaced. The following introduces the processing of scrap steel tubes and pipes.

Scrap steel pipe and iron sheet is our common waste metal steel in the scrap metal recycling enterprise and waste recycling station. Their steel composition is high, accompanied by certain rust and oxidation rust, and there are certain non-metal materials in the middle. Miscellaneous, these need to be solved, and the density of their metal and steel is very unstable because it is doped with a lot of scrap steel with too small gaps and low-density scrap steel profiles, pipes, iron sheets, skins, barrels, etc., resulting in high density And the weight is very low, which increases the transportation cost and storage is very inconvenient.

At this time, multiple factors need to be taken into account. Our preferred treatment method is crushing. First, the scrap steel pipe and iron sheet skin tube are unified and concentrated. The scrap steel pipe and iron sheet skin tube after the crushing by the scrap crusher are small in size. The shape is convenient for transportation and stacking. The scrap steel pipe and iron sheet skin tube after low-speed pre-crushing and high-speed hammer plate crushing of the scrap steel crusher are scrap steel crushed materials that have been crushed, decontaminated, and encrypted. Scrap iron and steel are neat in shape, complete in phase, uniform in size, high in density, high in purity and high in selling price. It is the preferred processing equipment for major waste recycling companies, iron and steel enterprises, smelters, foundries, scrap metal recycling stations, and metal recycling resource companies. .

The scrap steel crusher adopts the centralized crushing method, which is the preferred crushing method for the crushing operation. It can quickly process a large amount of scrap steel, large piles of scrap iron, metal briquettes, packed metals, scrap car bodies, scrap metal, cans, scrap steel profiles, scraps, plastic steel windows and doors, scrap cars , Shredding and recycling of scrap steel materials such as bicycle frames, paint buckets, etc.

8 steps to teach you scientific maintenance of waste plastic pellet machine

The use of waste plastic granulators is very widespread now, especially in the waste plastics industry. The pollution caused by waste plastics to the environment was relatively serious, but since the appearance of granulators, the pollution has been reduced a lot. Waste plastics The use of granulators not only reduces environmental pollution but also enables some waste plastics to be recycled.

How to maintain the waste plastic granulator?

Maintenance method of decadent plastic pellet machine:

1. First, the waste plastic pellet machine should be placed in a ventilation position to ensure that the working heat of the motor is dissipated and extend its life;

2, the bearings should be regularly filled with lubricating oil to ensure the lubricity between the bearings;

3. Regularly check the cutter screws. After using the new plastic granulator for 1 hour, tighten the screws of the moving knife and the fixed knife with the tool to strengthen the fixation between the blade and the knife holder;

4. In order to ensure the sharpness of the cutting edge of the scrap plastic pellet machine, the cutter should be checked frequently to ensure its sharpness and reduce unnecessary damage to other components caused by the blunt lack of the blade;

5. When changing the tool, the gap between the moving knife and the fixed knife: more than 20HP broken, the thinner the recycled material, the gap can be appropriately increased;

6. Before the second start, the remaining debris in the machine room should be removed first to reduce the starting resistance;

7. The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange because the plastic granulating machine room discharges the powder and enters the shaft bearing;

8. The waste plastic pellet machine should be well grounded.

Cleaning and drying of waste plastic

There are two methods for cleaning and drying waste plastics: mechanical cleaning and manual cleaning. Some plastic products can only be cleaned manually after recycling, and some plastic products can be mechanically cleaned and dried. The following are the specific operations of mechanical cleaning and drying.

Mechanical cleaning and drying are divided into batch and continuous. Intermittent cleaning First, wash the waste plastic into a water tank, and use a plastic mixing machine to remove loose dirt such as sand, dirt, etc. that are stuck to the surface of the plastic and sink it to the bottom of the tank; if there are many wood chips and paper, It can be further purified in a sedimentation tank equipped with a special pump; for dirt that is firmly attached, such as printing inks and adhesive-coated paper labels, you can manually pick out larger pieces and put them in after crushing by a plastic grinder Soak in the hot alkaline solution tank for a period of time, and then rub and rub each other with mechanical stirring to remove dirt. Finally, the washed and crushed waste plastic is sent to a centrifuge to be dried, and dried in two steps of hot air to residual moisture of ≤0.5%. Continuous cleaning The waste plastic is sent to the plastic crusher by the conveyor belt for coarse crushing, and then sent to the large separation section.

http://www.recycle-plant.com/plastic-film-recycling-production-line

The floating material enters the wet mill through the conveying roller, and then enters the sedimentation tank. Everything heavier than water is separated, even the smallest particles are no exception, achieving the best cleaning effect. The new generation of crushing and washing integrated machine developed by the production not only keeps the ruggedness of the original body, but also undergoes technological innovation to produce products that are not only durable but also have a significantly improved cleaning effect than before. Buying machinery to make you successful is not a dream.