Metal packing machine operation skills

1, the metal baler is equipped with a buffer silo and feed conversion device. Since the multi-cylinder hydraulic cone crusher crushing principle is the use of a laminate, which requires feeding filled evenly, and to a large quantity, and so the equipment used in the installation must pay attention to the front of the device with a buffer silo, to ensure that the cone crusher for continuous material. Equipment to the feeding amount to be adjusted accurately controllable, install the inverter feeding equipment, ensure the stability of the device filled with feed.

2, the mounting means center feed. Break out of the multi-cylinder hydraulic cone material is an important factor in its effectiveness and the service life of the crushing impact. Metal baler equipment to be installed central feed device to ensure that the center feed. Discharge equipment must be kept smooth and prevent the material from too wet, too much or too material powder caused by the accumulation in the bottom of the device, and damage to equipment.

3, for the metal baler belt installation device and the check equipment in addition to iron. It is a multi-cylinder hydraulic belt cone crusher feed conveyor means, arranged so the correct belt is also related to the good functioning of the device. Feed belt plus confidential cone crusher and damage to the equipment in addition to iron, to prevent excessive iron. And checking means can be prevented from falling too heavy material, thereby reducing the belt strip to produce the trouble to stop the feed belt conveyor is stopped.