Operation sequence of waste plastic granulator

1. Turn on the power in the sequence set the temperature and pay attention to whether the heating is normal. Regarding how to effectively control the temperature of the main body of the waste plastic granulator, we have posted relevant content and can look at it.

⒉ Organize the hopper and other units, enter and exit the water pipe, check the oil level and smoothness of each gear oil, oil, high-temperature butter. The gear oil of the new machine should be replaced at least six months at the latest, and the smooth oil should be added at least once a week.

3. When the temperature is close to the set temperature, prepare the materials and start the main motor in sequence.

4. After the above operations are in place, turn on all fans in sequence>; vibrating screen>; pelletizer>; operation of the host.

5. Adjust the granulator during normal granulation, and adjust the particle size by frequency conversion. Before the screw is discharged, it is necessary to keep the pelletizer rotating. If it is a water-cooled spray pelletizer, the pelletizing hood must first pass water, and finally, the main machine is opened for formal production.

Website: https://www.recycle-plant.com/plastic-granulator-machine.html

E-mail: allenshuliyguo@gmail.com