Matters needing attention in the production process of metal briquetting machine

If you want to reduce the frequency of failure of metal briquetting machine during use, it is not enough to rely on good quality of metal briquetting machine. You can only say that good quality of metal briquetting machine is only a prerequisite. Machine maintenance and repair work.

In addition, we also need to keep in mind the precautions of the metal briquetting machine during the production process. Only by considering all aspects of the metal briquetting machine can the user ensure that the metal briquetting machine works well, reduce the failure rate, extend the service life and increase the profit.

What are the precautions we have in the production process of metal briquetting machine? Next, the editor will answer the question for you in detail. The operator of the metal briquetting machine should carefully read this article to see if he is correct in the operation of the metal briquetting machine. The issues that need to be paid attention to in the production process of the metal briquetting machine are as follows:

1. When conveying metal scrap to the metal briquetting machine, the cutting speed should be well controlled to avoid blocking due to too fast cutting, too slow cutting will affect production efficiency;

2. The raw materials should be filtered first to filter out impurities and other things to avoid damage to the mold and pollution;

3. Be careful during the blanking process, pay attention to whether there is material leakage, avoid small metal scraps falling on the piston rod of the cylinder, and push and pull to damage the cylinder;

4. Pay attention to the condition of the materials in the feed box, to avoid uneven feeding, causing the shaped cake to not form or crack;

5. During the pressing process, the metal briquetting machine should try to suppress the metal shavings of the same material. If you need to replace the raw materials, you need to adjust the pressure of the metal briquetting machine;

6. During the operation of the metal briquetting machine, the operator must carefully observe the metal briquetting machine equipment. If there is any abnormality, oil leakage or noise, the production should be stopped immediately for maintenance.

The above content is the matters that often need to pay attention to in the production process of the metal briquetting machine, for reference only. If you want to know more about this, you can consult us, or you can directly pay attention to the machinery website, our editor will regularly update and sort out the faults encountered by customers during the use of metal briquetting machine, and give A better solution to the fault.