Of course, if you enter too much water, it will enter the granules together with the granules to a large extent. For reuse, you need to add more defoamers to solve. At the same time, we have reconsidered the need to remove excess water inside the screw, taking into account the problems and failures in this area.
In which parts of the plastic granulator do you need to use the flue gas processor? Knowing this problem can handle all the generated flue gas and exhaust gas well, and it has reached the requirements of our environmentally friendly air department without causing pressure problems of air pollution.
The plastic pellet machine is produced with the rebirth and reuse of resources. Without his existence, the discarded plastic bags and woven bags in the society cannot be recycled, and the purpose of better integration of resources cannot be obtained. Another aspect is a waste of resources. It is even more important to fully grasp the link between the granulator and the flue gas treatment. The melting stage of the waste plastic must be used. In this place, high temperature is required, and a gate of the flue gas processor must be used.
The screw of the twin-screw granulator must be used when it comes out of the particle strip. Here, due to the long route, the amount of smoke is also large, and the vent of the flue gas processor is also responsive. After the pelletizing step, this place is the cooling part of the plastic pellet machine, the flue gas exists for a long time, and the end of the flue gas processor.
plastic pellet machine methods
Please pay attention to our website for more details:
https://www.recycle-plant.com/pp-pe-flake-products-recycling-and-pelletizing-machine
No comments:
Post a Comment