Then, for the maintenance of the woven bag granulator, the following woven bag granulator manufacturers talk about the daily maintenance and maintenance of the woven bag granulator
1. Main machine: The woven bag granulator should first check the patency of the cooling water, the temperature (generally ∠26 °C), the feeding condition, the temperature and pressure of the cylinder, the wear of the screw and the cylinder.
2, the machine head: the size loss of the perforated plate, the damage, and corrosion of the surface of the flow channel, whether the blockage affects the appearance and output of the product.
Secondly, (1) woven bag granulator checks the temperature rise of the motor and the fuel tank, whether the bearing is partially overheated, abnormal noise of the motor and gear, oil leakage, oil filter, radial ring run of the spline shaft and the end face of the screw Contact gap.
(2) Regularly clean the oil filter and remove the dirt on the bottom of the tank, and regularly add lubrication to the lubrication point.
(3) The new gear transmission box of the woven bag granulator has been filled with gear oil, and the new oil is replaced every 4000 hours after the operation.
(4) The woven bag granulator should check the operation of the drum shaker, motor, etc., and whether the seal parts leak.
(5) The cooling equipment and piping are required to be clean and clean, and there is no suspended impurities in industrial soft water. The water filter and water tank should be inspected and cleaned regularly, kept clean and replaced with new water.
Nowadays, the woven bag granulator is used more and more widely. The above is the woven bag granulator manufacturer talking about the daily maintenance and maintenance of the woven bag granulator, I hope to help you.
No comments:
Post a Comment